A COMPLETE GUIDE TO INSTALLING A NEW AIR CONDITIONER THE RIGHT WAY

7 BEST PRACTICES FOR INSTALLING AN AIR CONDITIONER CORRECTLY

1. 01
   Bước 1

   Choose the right installation location

   The installation location directly affects cooling performance and the lifespan of the unit.

   ›Indoor unit

   • Position it in the center of the room so airflow distributes evenly
   • Avoid blowing air directly onto beds or workspaces
   • Mount it about 10–15cm below the ceiling

   ›Outdoor unit

   • Place it in a well-ventilated area with a protective cover
   • Avoid direct sunlight
   • Maintain sufficient clearance for heat dissipation (at least 30cm on all sides)
2. 02
   Bước 2

   Ensure correct copper pipe length and routing

   The copper piping is the "bloodstream" of the air conditioning system.

   ›Things to note

   • Minimum length is typically 3 meters (varies by brand)
   • Avoid runs that are too short or sharply bent
   • Minimize pipe joints to prevent refrigerant leaks

   💡Proper piping technique helps the unit cool faster and run more efficiently.

3. 03
   Bước 3

   Vacuum the system — a mandatory step that's often skipped

   This is a critical step that many installers skip to save time.

   ›Vacuuming the system helps

   • Remove air and moisture from the piping
   • Prevent ice buildup and refrigerant blockages
   • Extend compressor lifespan

   ⚠️Without vacuuming, the unit may lose performance and fail within 6–12 months.

4. 04
   Bước 4

   Install a safe electrical system

   Air conditioners are high-power appliances and require a dedicated electrical circuit.

   ›Make sure to

   • Install a dedicated circuit breaker (CB) for the unit
   • Use wiring of the correct gauge
   • Ensure a stable power supply

   💡This helps prevent electrical fires and protects the equipment long-term.

5. 05
   Bước 5

   Check drainage and prevent leaks

   An improperly installed drain line can lead to many frustrating issues.

   ›Common consequences

   • Water dripping inside the home
   • Damp and moldy walls
   • Unpleasant odors

   ›Things to note

   • The drain pipe must have an appropriate slope
   • It must not be kinked or clogged
6. 06
   Bước 6

   Test thoroughly and inspect before sign-off

   After installation, run a full check before making payment.

   ›Check that

   • The unit cools quickly
   • There are no unusual noises
   • There are no water or refrigerant leaks

   ⚠️Do not rush to pay before the full test has been completed.

7. 07
   Bước 7

   Choose a reputable installation provider

   No matter how good the unit is, poor installation will still cause problems.

   ›A professional installer will

   • Provide a transparent quote before starting work
   • Follow a standardized technical process
   • Offer a clear workmanship warranty

   💡This single factor determines 80% of your overall experience with the unit.